PROCRYLA Cold-curing Acrylic Resin for Prostheses /Powder
Mix Cold Cure Powder and Liquid to form a selfcure (autopolymerising)
acrylic resin. Conforms to BS EN ISO 20795-1 Type II Class I For repairs,
indirect relines and additions to removable prosthetic aplliances. Will
bond to acrylic teeth when cured by hydroflask.
acrylic resin. Conforms to BS EN ISO 20795-1 Type II Class I For repairs,
indirect relines and additions to removable prosthetic aplliances. Will
bond to acrylic teeth when cured by hydroflask.
Technical Data
| Powder | ProCryla Cold Cure Powder |
| Liquid | ProCryla Cold Cure Liquid |
| Mixing Ratio | Powder: 21 gr – Liquid:10 ml |
| Dough Time | 20 – 30 Minuten |
| Work Time | 15 – 20 Minuten |
| Curing |
In hydroflask at 40°C for 10-20 minutes
at 30psi Remove carefully, trim and polish.
Will also self cure in 20 minutes.
|
Highly Flammable Flash point below 11°C Harmful by inhalation, contact
with skin and if swallowed. Danger of cumulative effects. Irritating to eyes,
respiratory system and skin. May cause sensitisation contact.
with skin and if swallowed. Danger of cumulative effects. Irritating to eyes,
respiratory system and skin. May cause sensitisation contact.
Keep container in well ventilated place. Keep away from sources of
ignition-no smoking. Do not empty in to drains. Take precautionary
measures against static discharge. Avoid prolonged exposure to
sunlight. in case of contact with eyes and skin: Flush with copius
volumes of water. Seek medical attention. Store below 25°C.
Replace cap immediately after use
ignition-no smoking. Do not empty in to drains. Take precautionary
measures against static discharge. Avoid prolonged exposure to
sunlight. in case of contact with eyes and skin: Flush with copius
volumes of water. Seek medical attention. Store below 25°C.
Replace cap immediately after use
Reviews
There are no reviews yet.